Conference programme

Back to the programme overview printer.gif Print

Friday, 20 November 2015
09:30 - 11:00 LiDARs replacing meteorological masts

Share this session on:

Resource assessment  
Onshore      Offshore    

Room: Montparnasse

Over the last five years the on and offshore wind industries have seen an increase in both acceptance of LiDAR measurements and commercial applications for LiDAR. It is through sharing the results of validation studies that uncertainties can be reduced and the full commercial value of this technology and its wide number of applications can be realized.

Learning objectives

  • Delegates will be able to describe the value of validation of floating against fixed LiDARs and defend why this practice is a suitable alternative to validation against meteorological masts
  • Delegates will be able to explain why LiDAR measurements are at least as good as meteorological mast measurements
  • Delegates will be able to identify two different approaches to using commercial LiDARs to measure turbulence intensity
  • Delegates will be able to explain why different measurement devices have different uncertainties levels
This session will be chaired by:
Breanne Gellatly, Direction of European Operations, Axys, Italy

Abstract ID: 360
Jan Willem Wagenaar
Researcher and Project manager, ECN, The Netherlands
Ring analysis floating LiDAR, static LiDAR and offshore meteorological mast

Share this presentation on:

Abstract ID: 310
Fabrice Guillemin
Project manager, IFP Energies nouvelles, France
Performance study of Lidar measurements filtering for turbulence estimation

Share this presentation on:

Abstract ID: 95
Ameya Sathe
Postdoc Researcher, DTU Wind Energy, Denmark
Measuring Accurate Turbulence using Commercial Lidars

Share this presentation on:

Ignacio Lainez Aracama
EDP Renováveis, Spain
Floating Wind measurement campaigns: WindFloat Case Study  

Share this presentation on: